(Closed) Tip for cleaning your moissanite

posted 3 years ago in Rings
Post # 2
Member
10457 posts
Sugar Beekeeper
  • Wedding: February 2014

Windex is also awesome! I soak it and use a toothbrush. 

Post # 3
Member
3249 posts
Sugar bee
  • Wedding: May 2015

Thank you for the tip! I came back to Wbee after a long hiatus because I noticed the same thing on my FB moissanite and, while I’d successfully gotten the film off with toothpaste before, there seems to be more of it and scrubbing with baking soda didn’t work! I don’t have Soft Scrub but I’m going to try some Comet. :/

Post # 4
Member
3590 posts
Sugar bee
  • Wedding: January 2000

Creiddylad:  omg Comet is an abrasive! ack! That approach would scare me.

I don’t know the product that the OP mentioned.

Post # 5
Member
3249 posts
Sugar bee
  • Wedding: May 2015

FauxPas2012:  Maybe I’ll try toothpaste first. But isn’t Soft Scrub an abrasive as well? :/

As moissanite is harder than sapphire, I’m not super worried about scratching it. My ring originally had a brushed finish, which has worn away, so I’m also not concerned about ruining the polish on the ring– I wouldn’t mind returning it to its former state. 🙂

I think I’ll try toothpaste and post again about whether that worked.

Post # 6
Member
24 posts
Newbee
  • Wedding: June 2016

 

I used a jewelry cleaning cloth & silver cleaning paste. First applied a silver cleaning paste, just the right amount to cover my stone. I rubbed, and rubbed and rubbed. 10-15min of repeated rubbing (vigorous rubbing). Cleaned it with running water and a soft brush dipped into connoisseurs solution to make sure that the silver paste is all gone). Then after, i rubbed it with the jewelry cleaning cloth (the one with the light and dark colored one). Total cleaning time 1hour. 

Tadaaaa! All worth it! 

Post # 7
Member
2263 posts
Buzzing bee

Why top like eight old threads for this

Post # 8
Member
461 posts
Helper bee
  • Wedding: April 2018

+1 janeblack 

erikayamaguchigarcia :  For the love. Please stop commenting on every single archaic thread. One is enough to bump the board up and searchers will find it. 

Oh, and if you just want to show off a sparkly, you can just say that. People love to see rings (when they’re not bombarded with a million pics on 10 different threads.)

Post # 9
Member
24 posts
Newbee
  • Wedding: June 2016

BeeLovesMTB : 

Oh my bad,  i just wanted to help. Sorry for sending a lot. Will not happen again. my intentions was just to help. Sorry again. I was just so happy to have removed the stains. And proud of myself too. Sorry again if it got to your nerves, it wasn’t my intention. 

 

Have a good day. 

Post # 10
Member
24 posts
Newbee
  • Wedding: June 2016

…..

Post # 11
Member
24 posts
Newbee
  • Wedding: June 2016

janeblack :   janeblack :  sorry about that. I just wanted to help. I did not know how it works. I’m new here, learning the ins and outs still. Again, my apologies. 

Post # 12
Member
2395 posts
Buzzing bee
  • Wedding: June 2015

Don’t worry, it’s tricky to know what’s best. I’ve been on other sites where newcomers get slated for starting new threads on topics that have been covered before and are searchable.  

Post # 13
Member
58 posts
Worker bee

nori_ebi :  do what you want! If the original poster wants no more comments than she can turn it off. I not understand why we should have to start something over that’s been already done. Just add on! It’s not a big deal. 

The topic ‘Tip for cleaning your moissanite’ is closed to new replies.

Get our weekly roundup of the best of Weddingbee.
I agree to receive emails from the site. I can withdraw my consent at any time by unsubscribing.

Find Amazing Vendors