Post # 1
I can’t find an answer to what size i should get my table overlays
I will have 60 inch round tables and 72 inch banquet tables
I liked a silver taffeta pintuck overlay i saw but it was 108 inches long. Is that too long for both of these tables?
What size did you buy for your table overlays
Post # 3
On a 60″ round table fabric corners will drape down about 12½” off the rim of the table (approximately to one’s lap). This is a 60X60 overlay.
Post # 4
@fuentesbee: Are the overlays round or square?
A 108″ round overlay on a 60″ round table will overhang 24″ all around which is fine.
A 108″ square overlay on a 60″ round table will have a hypotenuse of 152″ (the length from corner to corner on the overlay). Tables are usually 30″ off the floor so the maximum length you would need is 30″ x 2 ( the height on each side) plus 60″(the width of the table) = 120″. A 108″ overlay would hang on the floor by 16″ at the corners on each side. I would use a smaller overlay.
On the 72″ banquet tables the 108″ round overlay will have an overhang of 18″ all around which is fine.
The maximum length needed on a 72 inch table would be 30″ x2, plus the width of the table = 132″ so the overlay would still hang on the floor by 10″ on each corner. I would choose a smaller overlay.
Post # 5
Post # 6
@fuentesbee: I just realized I assumed the 72″ banquet tables were also round. If they are not let me know and I can recalculate for you.
Post # 7
@julies1949: its rectangular
Post # 8
Your table linens I’m assuming are 120″ for the 60″ round tables which will go to the floor. With that in mind he 108″ overlays will be fine. I believe that is what we had.