(Closed) 2mm pave wedding band with 1 carat solitaire on plain 2mm band?

posted 5 years ago in Rings
Post # 2
Member
1710 posts
Bumble bee
  • Wedding: July 2012

No pictures sadly, but would you be alright with a thin (.8-1mm) plain palladium spacer band, then a 1.5mm or so pave band? That way the stones won’t rub against your e-ring and get damaged, and visually it should minimize the gap look. 

Otherwise, you’ld likely have to solder the two rings together to keep the slight curved band from moving I would think? 

Post # 4
Member
448 posts
Helper bee
  • Wedding: May 2015

rel318:  can you post pictures of what you have? That might help.

Post # 5
Member
580 posts
Busy bee
  • Wedding: July 2015

I have a halo with a plain band, so I figure it almost looks like a solitaire! My rings are each about 1.5 mm wide and I think they look pretty great. Symmetry is important to me too, so they had to match. Good luck 🙂

Post # 6
Member
119 posts
Blushing bee

I picked out a 2mm shared prong eternity to go with my EC solitaire (2mm plain shank). The band has a narrow profile allowing it to sit pretty flush with my engagement ring.  A slightly wider eternity ring (bigger stones, higher profile) settled to create a gap.   So even though I think the larger eternity looks much better when worn alone, I chose the look that made the ‘set’ look best.  Also, the thinner bands look nicer for stacking In My Humble Opinion.   I chose prongs over pave because I wanted to sonic clean my rings without fearing id lose a stone.  

Post # 7
Member
587 posts
Busy bee
  • Wedding: November 2011

The solitaire is 2mm, the pave band is 1mm.

Post # 8
Member
9595 posts
Buzzing Beekeeper
  • Wedding: September 2015

rel318:  I just bought exactly this for my wedding. 

Post # 9
Member
9595 posts
Buzzing Beekeeper
  • Wedding: September 2015

Except the band is a little over 2mm I think- 2.5 and the ering is 1 1/2 carats. I went with bead set over prongs for security.

Post # 14
Member
1292 posts
Bumble bee
  • Wedding: January 2011

rel318:  Unrelated but I ADORE that wedding band! LOVE LOVE LOVE it. 

Post # 15
Member
9595 posts
Buzzing Beekeeper
  • Wedding: September 2015

rel318: thank you.  if both your rings are fitted correctly they shouldn’t “flop” and be a tilted i don’t think. I do have a gap in my set but I feel like only I notice it. The thing about a curved band is, it looks odd on it’s own. Thats why I decided to go with a straight one. 

Sequinedheart:  thank you!!

The topic ‘2mm pave wedding band with 1 carat solitaire on plain 2mm band?’ is closed to new replies.

Find Amazing Vendors