Post # 1
I posted a few days ago asking for pictures of rose gold rings because I still wasn’t too sure which color gold I wanted (I decided to go with the rose!) and probably should have included stone sizes on my post but forgot. The ring I picked out comes in 8x6mm and 7x5mm for and I think the fingers in the picture might be a bit bigger than mine so I’d love to see pictures of either to compare, or just anything relatively close to that! Thanks!
Also I’m not quite sure if the messurements are just the center stone or include the halo.
Post # 2
http://www.diamdb.com/compare/1ct-oval-7x5x0-vs-1.5ct-oval-8×6/ This might help you visualize.
ETA: ignore the bit about carat and size, I just put in approximate numbers as it is moissanite.
Post # 3
It’s not a rose gold ring, but I designed this one after looking at hundreds of pictures 🙂
Post # 5
You can print this chart (make sure to follow printing directions) and cut out the sizes you are considering, and tape them to a plain band or something on your finger to see. Keep in mind it won’t give you an idea of the height or anything which also affects appearance, but it at least gives you a reasonable gauge of the differences in finger coverage between the two sizes.
Post # 6
I posted my ring on the other thread, but I’ll add here with measurements since it’s also oval (and at least it’s a different photo) :). The GIA cert has the dimensions on it for mine (so they aren’t round numbers) – the center stone is 9.55 x 6.46 and my ring size is 6. I don’t have exact measurements of the halo, but using a small ruler it looks like about 14×10. I would guess the measurements you’re seeing (8×6 adn 7×5) are the center stone – my halo adds approx 4 mm on each side, so your 8×6 center might be around 12×10-ish with halo.
Post # 7
Thank you this was helpful!
I love your ring! Thanks for posting!
This is super helpful, thank you!
Your ring is so beautiful, thank you for the information!