(Closed) Cushion Halos Shown On

posted 5 years ago in Rings
Post # 3
Hostess
2999 posts
Sugar bee
  • Wedding: April 2014

I’m not sure if mine qualifies what you’re looking for.  I have a 1.5 round center stone with a cushion halo and micropave split shank band.  Total carat weight is just a tad over 3 carats.  I chose this because I get the “look” of a cushion with the fire and brillance of a round stone.  I am a size 6.5

I’ll post a few so you can get the idea:

Post # 5
Member
3276 posts
Sugar bee
  • Wedding: June 2014

Mines a .75ct center stone and 1.5tcw on size 5 finger that is pretty long

Post # 6
Member
127 posts
Blushing bee
  • Wedding: May 2013

1.5 Center stone on a 6 3/4 finger size.

Post # 8
Member
36 posts
Newbee
  • Wedding: September 2014

Mine is a cushion cut micropave halo engagement ring. Pictures show ring in natural sunlight and indoor light. Center stone is 1.28ct and surrounding stones are .54ct totaling 1.82 carats. Ring size is 5? Jewelers said my fingers are short and recommended that I go with a thin band to accomodate future wedding band as well.

 

 

Post # 9
Member
82 posts
Worker bee

This is not my ring it’s my best friends ring but its a 1 carat princess center in a cushion halo…2ctw she’s a size 7 I think and has medium to long fingers 

Post # 10
Member
6110 posts
Bee Keeper
  • Wedding: October 2013

My center diamond is 1.01ct and the total carat weight of the ring is 1.55cts. My ring size is 5.25

Post # 11
Member
676 posts
Busy bee
  • Wedding: February 2013

1/5 carat center diamond with another 1/4 carat in the halo and band. My finger is 6.25 but the ring is 6.5, and they are short . the bottom pic shows it paired with my .25 carat band and I would not have room for anything larger. The band is about 1.8mm and the ering is just under 4mm at its widest (halo is about 7mm wide). It looks like I would have room for more but the webbing comes up high between my middle and ring finger.

Post # 12
Member
685 posts
Busy bee
  • Wedding: December 2013

Mine is a 1ct center stone (elongated cushion) with a micro pave halo and band. Total ct weight is 1.4??  My ring size is 4.75 and I have really long fingers. I plan on at least one, possibly 2  eternity bands to get that nice stacked look.

Post # 13
Member
196 posts
Blushing bee
  • Wedding: August 2014

My ring is a cushion cut 14k white gold. Main diamond is .75 ct. total ring is about 1.4, I believe. size 6 finger – my fingers are definitely long, very long. haha. 

Post # 14
Member
278 posts
Helper bee
  • Wedding: June 2013

 

My center is 1.01 ct cushion, ring size 5.75, total ct wt is 2.17 ct. I think I have short fingers!

Post # 16
Member
776 posts
Busy bee
  • Wedding: November 1999

@NewKid:  Here’s another one for your reference – I have long skinny fingers (ring size 4.5) and I was also really concerned about a stone that sticks out too much, but I loved the look of them. This is what Fiance and I picked out – I don’t know a ton of details but the centre stone is .5 carat round, cushion halo, with the remaining diamonds (halfway around the band and on the entire centre) adding up to another .5 carats for 1.0 carats total weight. I love love love my ring, mainly because of the setting! Don’t mind the fuzz on the second picture.. didn’t see it at the time 🙂

Good luck 🙂

The topic ‘Cushion Halos Shown On’ is closed to new replies.

Find Amazing Vendors