(Closed) Different ways to prevent rings from spinning?

posted 5 years ago in Rings
Post # 2
Member
10577 posts
Sugar Beekeeper
  • Wedding: December 2013

Getting a Euro shank would help balance out the ring to prevent spinning. Getting a shank that is in good proportion to the center stone would help too. My center stone is 1.65 carats with a halo and my shank is only 1.7mm so it spins because it’s top heavy. I’ve also heard that cathedral style settings can help the ring from spinning but I’m not sure if that’s entirely true. I would also assume that split shank rings would have good balance and not spin as much as a single shank ring. And of course you could always add sizing beads

Post # 3
Member
1941 posts
Buzzing bee
  • Wedding: May 2018 - City, State

MrsSparkleBee13:  +1 to euro shank.

My ring never spins!

Post # 4
Member
1624 posts
Bumble bee

I have a euro shank and my ring still spins, but it’s a half size bigger than my finger to fit over my knuckle. The spinning was greatly reduced once I got my wedding band and the Engagement Ring is pushed up closer to the knuckle. 

Post # 5
Member
112 posts
Blushing bee

I personally found euro shank uncomfortable, so sizing beads work best for my fingers. There are a few rings that I have are just a teeny tiny loose (during winter months) I would just wear another band to “hold” it in place.

Post # 6
Member
10577 posts
Sugar Beekeeper
  • Wedding: December 2013

In the winter time I add a 1mm spacer band in between my engagement ring and wedding band to help bulk it up a little and it really helps with spinning. But you asked for design elements in a ring so I know this is probably irrelevant 

Post # 7
Member
2470 posts
Buzzing bee
  • Wedding: May 1995

Ahh ring spin. This is why I stack. My fingers are narrowest at the base and if a ring fits over the knuckle is generally spins on me so 2 or 3 thin bands stacked up have always helped stabalize them for me. Plus … more rings! 🙂

Post # 8
Member
97 posts
Worker bee
  • Wedding: October 2015

I have a ring guard adjuster. It works good for me and it’s comfortable

Post # 9
Member
9504 posts
Buzzing Beekeeper
  • Wedding: August 2012

Mine stopped spinning after I had my two wedding bands soldered to the ering.

Post # 10
Member
38 posts
Newbee
  • Wedding: March 2017

I have large knuckle bones but skinny fingers, so my rings always used to spin. I had my round ring “bent” to an oval shape, it fits over my knuckle better and doesn’t spin.

The topic ‘Different ways to prevent rings from spinning?’ is closed to new replies.

Find Amazing Vendors