Post # 1
I used thermo web tape runner for my invites and none of my stuff stuck 🙁 I’m using the folder enclosures and enclosure cards from paper source. Anyone have any ideas what I can use to make these stick?! Also I checked and the thermo web tape is the permanent version.
Post # 3
Weird. I used Pritt Permanent roller glue on that exact combo and it worked like a charm
Post # 4
I did 40 of my invites yesterday and when I went to look at the tonight when I opened them they just lifted off with a flick! So frustrating! How much did you use? I puta some on each corner and in the middle.
Post # 5
I use the Advanced Tape Glider by Scotch its Uh-mazing. http://www.amazon.com/Scotch-85-4-Inch-Advanced-Glider/dp/B00409NNYM
Try outlining the entire paper before sticking, just a few patches on the corner wont do. if that doesn’t work I’d switch to glue dots and put down 1 per 2 inches on the border. I’ve always found that the small disposable tape runners were not particularly good adhesives.
Post # 6
3M adhesive spray is the best! DH saw me and my friends struggling with sticks and tapes so he got us this stuff. He said he used it for lots of projects over the years. We got a version that’s formulated for crafts and it works great. The key is using it very lightly. A little goes a long way. The best part is that you can peel it off quickly if it’s not straight as it takes a second to set. It doesn’t distort the paper or ink either!
Post # 7
@MrsPom: Did you every find a good adhesive? I ran into the same problem. I did 100 invitations last week and I just went back to check and they are all lifting. I was going to try the scotch brand, but I would like to see what you suggest. Thanks.