(Closed) HELP! Does your ring make a noise?!?!

posted 6 years ago in Rings
Post # 3
Member
2553 posts
Sugar bee
  • Wedding: May 2013

The stone is loose for sure. See if you can twist the diamond, mine rattled and I could turn it. Had to get it adjusted. Maybe you have a smaller stone loose.

Post # 4
Member
2462 posts
Buzzing bee
  • Wedding: April 2018

It should definitely NOT be rattling. I had a RHR with 6 pink sapphires in it as well as some diamonds, and it only EVER rattled when a stone was loose.

Post # 7
Member
112 posts
Blushing bee
  • Wedding: April 2015

I don’t know about the rattling but I would suggest getting a magnifying glass and a pair of tweezers. You can check the stones yourself!

Be gentle, don’t gouge, run the tweezers over the top of each stone. Then use them to gently push on the side of each stone (especially for the side stones!). You shouldn’t see any movement.

Rocking or spinning is bad news. Just be careful not to confuse movement with the reflection of the tweezers moving.

Maybe this will save you some headache, uncertainty, and running around! 🙂

Post # 8
Member
1068 posts
Bumble bee
  • Wedding: September 2013

Go to the jeweler, a different one. It’s not fine.  My jeweler always checks by lighting tapping my ring to see if it’s loose and you should be checking for that every year. Yours is definitely loose.

Post # 9
Member
328 posts
Helper bee
  • Wedding: September 2013

Definitely need to get the prongs tightened! Mine jingled and they tightened it and took less than 2 minutes! Even if your jeweler says it is fine, just say you want it tightened for reassurance!

Post # 11
Member
328 posts
Helper bee
  • Wedding: September 2013

@MsPiggy:  Oooh weird, mine does not jingle at all! At this point I would take it to another jeweler and ask them why it still jingles because then they will give you an honest answer and be more willing to help! Also my prongs are the same as yours so a constant jingle is not normal.

Post # 13
Member
328 posts
Helper bee
  • Wedding: September 2013

@MsPiggy:  I know how you feel, my jeweler is in my hometown so I had to wait a few weeks before I could go to them. I didn’t even want to clap with my ring on because I thought the diamond would fall out! haha

Post # 14
Member
2440 posts
Buzzing bee
  • Wedding: September 2013

It might be the channel set side stones. Take it back to the jeweller

Post # 15
Member
112 posts
Blushing bee
  • Wedding: April 2015

If none of your diamonds are loose maybe its your head. 😀

Well… not your head but the head on your ring. See if it looks cracked or off at all.

Post # 16
Member
1089 posts
Bumble bee
  • Wedding: May 2013

Last timeI went to the jeweler he told me my prongs were loosed and I needed to have them tightened…I asked him how I would know and he said to hold the ring to my ear and flick it with my finger “you hear that rattling sound?” that means it’s loose….sooooooooooooooo that’s how you know your prongs need tightening!

The topic ‘HELP! Does your ring make a noise?!?!’ is closed to new replies.

Find Amazing Vendors