(Closed) How to hang baby blanket on wall?

posted 8 years ago in Babies
Post # 4
4518 posts
Honey bee
  • Wedding: September 2010

I actually just did this, not with a baby blanket, but with a blanket I wanted to hang up without ruining.

I took an old t-shirt, cut short (2 inch?) strips of cloth, and folded them lengthwise so that they were all a uniform width. I then took each strip, folded it in half to create a loop, and sewed it by hand onto the top edge of the blanket. I did this with 3 strips, so that there was a row of loops sewn into the top of the blanket (mine was narrow–you may need more loops). I bought a dowel from the hardware store and ran it through the loops, tied a piece of twine to the dowel, and hung the twine on a nail. I tried to sew the loops on in such a way so as to not damage the blanket too much, and so that the stitches could be removed. 

Post # 5
403 posts
Helper bee
  • Wedding: September 2010

I would suggest using a curtain rod and curtain clips  That way you don’t have to sew or puncture the blanket in any way, and it’s easy enough to take down when you want to. 

Post # 6
46672 posts
Honey Beekeeper
  • Wedding: November 1999

If you use curtain clips remember to use a bit of thin foam between the blanket and the clip so the clips don’t leave permanent marks on the blanket.

Post # 7
538 posts
Busy bee
  • Wedding: May 2010

I would second curtain clips.  I would check out Young House Love because they use them a lot because it makes the curtains kid friendly.  AKA if a kid pulls on the curtain or blanket, the fabric will just release from the clips rather than pulling the whole curtain rod from the wall. 

Post # 8
6009 posts
Bee Keeper
  • Wedding: May 2009

We used a curtain rod and clothes pins, lol.  Curtain clips sounds like a good idea, though.

The topic ‘How to hang baby blanket on wall?’ is closed to new replies.

Find Amazing Vendors