(Closed) How to Print DIY Invitations

posted 9 years ago in DIY
Post # 3
588 posts
Busy bee
  • Wedding: September 2012

I printed mine straight from photoshop with my printer and it worked best for me. If you’re unsure it might be best to have someone else do it. I know a couple of mine had some ink issues but it wasn’t that bad. I also used cardstock not photopaper so it depends on what you’re doing.

Post # 4
1401 posts
Bumble bee
  • Wedding: September 2012

I took mine to Office Depot to print. I have a discout through my job and I didn’t want to have to worry about any printing issues that may have come up.

Post # 5
10844 posts
Sugar Beekeeper
  • Wedding: September 2010

I wouldn’t save as a jpg, the quality might be vastly reduced. If you can save to a PDF that would be WAY better. Printing from Word would likely be fine so long as you have the printer set up properly for the margins, type of paper, etc. If you’re happy with the print quality you get from home, then go for it! I printed all of mine at home off my inkjet. I did my invitations in Illustrator though.

Post # 6
615 posts
Busy bee
  • Wedding: April 2012

Agree with

View original reply
@bakerella – definitely do not save as a .jpg unless you want a blurry and/or pixelated invitation! Print directly from the source if you can, or a PDF if you must.

As for printing, if you have a high quality printer that will give results you’ll be satisfied with, go for printing directly from your Word doc!

Post # 9
7898 posts
Bumble Beekeeper
  • Wedding: March 2012 - Pelican Grand Beach Resort

I would save them as a high quality PDF and have them printed at Staples or Kinkos or whatever. You really want these laser printed, not inkjet, so you should not do it at home.

The topic ‘How to Print DIY Invitations’ is closed to new replies.

Find Amazing Vendors