(Closed) I want to add a halo/double halo to existing setting

posted 6 years ago in Rings
Post # 4
764 posts
Busy bee

In short, no. you’re going to have to have the diamond reset.

Post # 5
1844 posts
Buzzing bee

@blingbling:  I second.

You could probably talk to you jewler, but odds are you are goign to have to get it reset. If you are looking for finger coverage and want a halo you might be able to get it bezel set to have it sit more flush, but I doubt you could add a halo to that setting, it would cover up your side diamonds.

Post # 6
9824 posts
Buzzing Beekeeper

Nope. But you can trade in the current setting and have your diamond re-set into a double halo.

Post # 8
1844 posts
Buzzing bee

Can we see pictures of your ring? I feel like a 2ct. stone probably has more finger coverage than you realize. Granted I have a smaller ring size, but I feel my 1.5ct. stone would swallow my whole finger if it were any larger. 

Post # 9
5189 posts
Bee Keeper
  • Wedding: January 2010

Sort of depends on your ring. If you have a peg head style, you will have to go custom and see if a jeweler can remake you a new peg head, or see if a Stuller peg head will work (if you go to the Stuller sit and look in their catalogue they have “halo peg heads” but they are not double halo but show you how it can be done). It also depends on how much room you have (a cathedral setting with shoulders will limit you more; whereas a “flat” band gives you more room) to work with.

So yes, it CAN be done, and I have seen it done on a couple rings on Price Scope, but it might also make more sense to get a whole new ring rather than try and reconfigure the one you have if it is still not going to be what you really want.


The topic ‘I want to add a halo/double halo to existing setting’ is closed to new replies.

Find Amazing Vendors