(Closed) ikea table number fail..

posted 6 years ago in DIY
Post # 3
6256 posts
Bee Keeper
  • Wedding: March 2014

I’ve never done anything with those frames in particular, but from spraypainting plastic in the past, you will probably need to sand and/or prime these. Didyou buy a spray-paint specifically made for painting plastics?


Post # 4
662 posts
Busy bee
  • Wedding: April 2012

I’d assume they are plastic like the regular picture frames I used from the dollar store. If so you’ll either need a spray paint specifically for plastic or use a primer first.

Post # 6
3618 posts
Sugar bee
  • Wedding: November 2011

I spray painted those frames for our wedding. I didn’t prime, and I didn’t have problems with bubbling. I used the Krylon spray paint that said it was suitable for plastic. I would recommend spraying thing layers to avoid dripping drops.

Post # 7
46411 posts
Honey Beekeeper
  • Wedding: November 1999

I have used them without a primer with no problems. I suggest you also remember to use very thin coats when spray painting anything.

Post # 8
4951 posts
Honey bee
  • Wedding: July 2012

Make sure you aren’t spraying too close to the frame. Stay back about 12 inches and do long sweeping motions and several thin coats instead of one or two thick ones. That should help.

Post # 9
2494 posts
Buzzing bee
  • Wedding: July 2012

@GFerg:  I second this. If not, you will end up with rage face in the backyard wondering how to get rid of all the drips.

Post # 10
860 posts
Busy bee
  • Wedding: November 2012

gotta make sure you holf the can far enough away, alos make sure you have a plastic specific paint…. that will make a huge difference.

The topic ‘ikea table number fail..’ is closed to new replies.

Find Amazing Vendors