(Closed) Plain bands with 0.5-0.8 4 prong solitaire please!

posted 4 years ago in Rings
Post # 2
Member
197 posts
Blushing bee

I would check out Etsy. That’s where I found my wedding band. It was so difficult to find a band that was low profile enough to sit flush. From the looks of your ring it seems you might have more of a struggle. 

Post # 4
Member
561 posts
Busy bee
  • Wedding: July 2016

I had the same issue, wanting them to sit flush but the basket on my e-ring stuck out too far. I ended up going custom and have a wedding band that has two notches for the e-ring basket to fit into. I will be getting mine soldered but you could easily just spin the rings so the notches will be on the bottom when you wear it alone, here are a couple pics:

 

 

Post # 6
Member
561 posts
Busy bee
  • Wedding: July 2016

I’d guess it’s about 3mm. My e-ring is 2.5 and they had to make the band  a little wider so that it wouldnt be  too narrow where the notches are. I’m not sure if this pic helps but this is it from the side.

 

here is a link to the setting on blue nile, their stock photos have a few more angles. http://www.bluenile.com/ca/build-your-own-ring/14k-white-gold-engagement-ring-setting_25670?elem=img&track=product

The topic ‘Plain bands with 0.5-0.8 4 prong solitaire please!’ is closed to new replies.

Find Amazing Vendors