(Closed) Post your rings and share the band thickness!

posted 5 years ago in Rings
Post # 3
Member
3101 posts
Sugar bee

@chillinchillin:  Ring size is 6.  Center stone is 5mm moissanite.  Both bands are 2mm.

Do you have any idea at all about your setting?  What styles do you like?

Post # 5
Member
2050 posts
Buzzing bee
  • Wedding: May 2013

I believe I have a 1-1.5mm band.  I wear a size 5  with a ring snuggie, so it should be about a size 4.5 or 4.75ish.

 

 

 

 

Have you looked into bands like this:

 

 

I feel that is something timeless and gorgeous.

 

 

 

Post # 6
Member
308 posts
Helper bee
  • Wedding: June 2013

My ring size is 5.5 and my stone is .81 ct set on a 2mm band.

Post # 7
Member
143 posts
Blushing bee
  • Wedding: January 2014

I’ve posted mine a lot recently, but i think it fits your requirements: 

It’s a 1.5 ct amora moissanite, size 6.25, except my fingers are technically 5.5-5.75… they are just notorious for swelling.  This setting is ENG 161 incase you want to look on moissaniteco.com and the band is 1.5mm.

I have gotten tons of compliments on the “dainty-ness” of this band, and I really do love it.  i would recommend going palladium in this setting though, so that the pave diamonds don’t fall out, and that the ring itself doesnt snap given that its so thin!

Hope this helps!!

Post # 8
Member
4476 posts
Honey bee
  • Wedding: November 2012

I think a stone that size would look great with a classic Tiffany setting – the kind with the low crown prongs.

Something like this:

http://www.moissaniteco.com/6prong-moissanite-solitaire-ring-p-16104.html

My rings are 1.9mm ering band, 2mm wedding band.  I’m a size 6.  For everyday wear, at least a 2mm band will be the most low maintenance.

 

 

Post # 9
Member
3101 posts
Sugar bee

@chillinchillin:  Just keep browing ring porn and you’ll narrow down what you want until you find the perfect one for you!

Post # 10
Member
8471 posts
Bumble Beekeeper
  • Wedding: July 2012

How do you ladies measure the thickness of your band? (I suck in math and figure a ruler wouldn’t be much help unless you change cm to mm?)

 

Post # 11
Member
89 posts
Worker bee
  • Wedding: February 2010

2mm engagement ring and 3mm wedding band

Post # 12
Member
344 posts
Helper bee
  • Wedding: September 2013

3mm ering and 3mm eternity band.  1.3 diamond and a 5.5 ring size.  Both platnium if that matters!

 

 

 

 

Post # 13
Member
4014 posts
Honey bee
  • Wedding: October 2013

My amora mossanite is a 1.5 carat! I wear an 8.5 though :/. My band is tapered and goes from a 4mm down to a 2.5mm at the bottom!

Post # 14
Member
307 posts
Helper bee
  • Wedding: March 2014

@Rubbs:  Most rulers should have cm and little lines in between for the mm (there are 10mm in a cm, you don’t need to be good at maths!). It can be hard to measure unless your ruler is laid out right, or you knew from the specs, especially when you are looking at bands less than 2mm.

Post # 15
Member
115 posts
Blushing bee
  • Wedding: June 2013

Here is my wedding band (well in 2 weeks!! Surprised), it is 1.2 mm. 

Post # 16
Member
5851 posts
Bee Keeper
  • Wedding: October 2013

@chillinchillin:  Try Gabrielle & Co. They have some BEAUTIFUL solitaire settings with just a little something interesting! I just disovered them myself, haha. My band is 2.3 mm and I think it’s just right. I wanted something somewhat substantial!

The topic ‘Post your rings and share the band thickness!’ is closed to new replies.

Find Amazing Vendors