(Closed) Printing problems

posted 10 years ago in Paper
Post # 3
Member
72 posts
Worker bee

Is there a way you can print multiple tags on one sheet and cut them out or are the tags already precut?

Post # 5
Member
107 posts
Blushing bee
  • Wedding: November 2008

You said you formatted the page dimensions, but do you mean on the template, or in the printer settings?  (Usually go to printer properties or printer settings, and this is where you tell it what size of paper you are using?)

Every printer is different, so it is hard to give you advice. How small are the tags? I was able to print onto 3×5 notecards with a cannon inkjet printer (the super cheapr printers they used to give away for free), but I have not tried anything smaller, there probably is a size limit on how small you can print.

Another option if printing on the cards doesn’t work is to print on clear adhesive labels that you can buy at any office supply store, and then put the labels on the tags.  People won’t notice.  Or print on pieces of cardstock and then cut it out and attach to the tags, like that was your plan all along.

Good Luck.

Post # 6
Member
72 posts
Worker bee

You could also try using a support sheet.  Like when you print on CDs using a little tray. Taping the tag with drafting tape to a sheet of card stock will usually allow a small tag to go through the paper feed. Just print a few test sheets to find the proper position.

The topic ‘Printing problems’ is closed to new replies.

Find Amazing Vendors