(Closed) Ring rotating

posted 6 years ago in Rings
Post # 3
Member
607 posts
Busy bee
  • Wedding: March 2013

@MrsAL2012:  weird my band is 5.5 too and the same thing happens to me… The jewler kept saying that it needed room in case my fingers swelled (which they never do). And I’ve gotten it smaller twice… finally to the 5.5 And the thing is always rotating on me. It goes over my knuckle easily now, but wouldn’t fall off on it’s own. 

 

Post # 4
Member
8444 posts
Bumble Beekeeper
  • Wedding: April 2013

@MrsAL2012:  I have the same problem, but I talked to my jeweler and there are a few things they can do.  You can put these little knobs on the inside of your ring, but my jeweler said that it’s not very comfortable.  He also had a pull apart band, but my ring is too narrow for it.  Other than that, I don’t know of anything other than eating junkfood and “growing” into your ring.

Post # 5
Member
1083 posts
Bumble bee
  • Wedding: June 2013

My ring is a size 5 (made smaller from a 6). . . any smaller and it wouldn’t go over my knuckle. My fingers swell a little. . . and definitely shrink in the winter. However, with the 5 it’s a happy medium for the weather. It moves around underneath my knuckle. . . more so up and down rather than rotating. Occasionally it’ll twist a little, but not much. If you get the sizing beads, there’s still that chance that it won’t go over your knuckle. As long as it doesn’t slip off your finger I think you’re ok. A little movement is normal. No ring is going to fit SNUG all the time. 

Post # 6
Member
58 posts
Worker bee
  • Wedding: June 2002

I have my ering soldered to the wedding band and its made a HUGE difference with keeping it upright on my finger. At first I was 100% against soldering, but now I love it!

Post # 7
Member
58 posts
Worker bee
  • Wedding: June 2002

Oh, and I meant to add that I had sizing beads on a ring before and HATED them. I could literally feel them 24/7 and they HURT going over my knuckle. 

Post # 8
Member
261 posts
Helper bee
  • Wedding: June 2014

I had my Engagement Ring sized from a 4.25 down to a 4 because of rotating. It is now a pretty tight squeeze over my knuckle, especially in the summer, but I only take it off a few times a week so it does not bother me

Post # 9
Member
3618 posts
Sugar bee
  • Wedding: November 2011

My ering stopped spinning once I added the wedding band. My rings are not soldered though. 

Post # 10
Member
1841 posts
Buzzing bee
  • Wedding: April 2014

your ring spins because it is top heavy. I have heard that it improves if you solder ering and wband together.

Post # 11
Member
1239 posts
Bumble bee
  • Wedding: March 2013

@MrsAL2012:  mine does it too, I am hoping it doesnt do it as much once I have the wedding ring.

Post # 12
Member
1647 posts
Bumble bee
  • Wedding: October 2013 - Rustic mill, historical site

Mine does that too and it’s super irritating.   It won’t fall off because of my knuckle, (although I could go a 1/4 size smaller and still have room for my knuckle to go through, but my finger above is probably a good size or size and a half smaller than my knobby knuckles  :/

Post # 13
Member
216 posts
Helper bee
  • Wedding: June 2012

I have sizing beads; they do not bother me at all, but my ering is a 1/2 size too big…

Post # 14
Member
1108 posts
Bumble bee

I love my sizing beads.  I have them in both of my rings.  They still don’t stop the spinning completely, but it’s not as bad.  I haven’t had any trouble as far as swollen fingers and stuck rings go.

Post # 15
Member
116 posts
Blushing bee
  • Wedding: January 2009

I have this problem and am now wearing another set during the cold months. I can’t resize bc in the summer my rings fit perfectly. 

Post # 16
Member
1063 posts
Bumble bee
  • Wedding: July 2014

I had a “bridge” put into mine, which is similar to the sizing beads but more comfortable.  The jeweler basically said that as long as I could put my ring over my finger, it was going to rotate as long as it was perfectly round.  I don’t have the picture on this computer, but you can search through my posts to see how it looks.

The topic ‘Ring rotating’ is closed to new replies.

Find Amazing Vendors