Show me your plain wedding band with your e-ring!

posted 7 months ago in Rings
Post # 2
Member
422 posts
Helper bee
  • Wedding: May 2019

Post # 3
Member
5 posts
Newbee
  • Wedding: January 2018 - Great white north

Mine is from an antique dealer so not sure but was listed as 3.5mm i think. Curved low profile.  Fits under and against my trellis setting. Love it cause i don’t even feel it and never have to take it off ( cleaning, messy work, etc.) 

Post # 4
Member
445 posts
Helper bee
  • Wedding: December 2018

Post # 5
Member
914 posts
Busy bee

Mine is a 14kt gold comfort fit. It belonged to my grandmother before me. Not sure about the width though.

 

 

Post # 6
Member
532 posts
Busy bee
  • Wedding: August 2019

I couldn’t decide if I wanted a diamond or plain band, so I decided on both! I’ll leave the plain one on 24/7, the diamond one on most of the time, and the engagement ring on during work, and on dates on the weekend (I don’t wear it at home). This was a cheapy tungsten band, we’re ordering our gold bands next month. Mine will be 2 mm rose gold, his will be 5 mm white gold. 

amazonring

Post # 7
Member
46 posts
Newbee
  • Wedding: July 2019 - City, State

My band is unplated white gold 3,5mm and i’m still choosing a diamond ring (in swedish tradition engagement and wedding rings are exactly opposite). So i can show multiple looks with a plain band)

The band is flat with rounded edges, comfort fit. And here i must warn you: comfort fit is really comfortable, but it doesn’t sit still at your finger but moves up and down quite a lot. If it’s even a hair too wide, it will slide and sit diagonally just as your finger gaps are. If it’s tight, you will get a nasty red channel in your finger, since it touches it in quite small area. So i highly recommend very VERY slight bend on the inside

Post # 8
Member
2967 posts
Sugar bee

ceeceelove :  2mm d-profile 18 K yellow wedding band (flat on the inside curved on the outside. After 31+ years of marriage and occasional polishing it has thinned to 1.9mm.

 

20140720_105358

Post # 9
Member
167 posts
Blushing bee
  • Wedding: April 2018

Mine is 1.7mm white gold and it is rounded but with squared-off edges. Not sure what to call that.

IMG_1863_3

Post # 10
Member
342 posts
Helper bee
  • Wedding: July 2018

dianaj17 :  oh my gosh, can I ask for more details on your diamond band? It’s so gorgeous and dainty! My rings are thin and I really want something to lind up with them which has proven difficult. I’m considering going back to our custom jewler but yours look like it might work. 

 

While im here I’ll share my set, although it is much thinner that what you’re going with OP! E ring is 1.5mm 14k brushes white gold and wedding band is 1.3mm 14k hammered yellow gold , both with a slight curve inside  

 

 

Post # 11
Member
3 posts
Wannabee
  • Wedding: June 2018

 

Mine is a 2mm D-profile platinum band. I also have a 1.6mm half eternity diamond band, but I love how classic the plain band looks. Doesn’t hurt that it’s also quite comfortable.  

Post # 12
Member
473 posts
Helper bee
  • Wedding: November 2018 - City Hall

2mm band

Post # 13
Member
17 posts
Newbee
  • Wedding: September 2016

I have a couple plain bands in rose gold. This is a contemporary fit 3.5mm. The contemporary band has the comfort fit on the inside, but the outside is gently rounded as opposed to the higher dome. I chose it because it blends with the heights of the other rings, sits lower to my finger, and it’s great if you have a job that requires you to work with your hands. 

Post # 14
Member
32 posts
Newbee

My fiancé and I just got our bands in this morning! Mine is a flat band in standard fit, 2.5mm (my e-ring is 1.7mm)

Post # 15
Member
743 posts
Busy bee
  • Wedding: City, State

sollyb :  Yay this is the look I want but set in platinum with a smaller stone lol

dianaj17 :  Wowww I love that stack

Leave a comment


Find Amazing Vendors