(Closed) solitaire stone on a very thin band?

posted 5 years ago in Rings
Post # 3
Member
4680 posts
Honey bee

Mine is 2mm at its thickest point, but it’s thinner at the top. Not sure how thin, but probably close to 1.5mm. .75ct Moissy. It’s the sol279 from MoissyCo if you’re interested. 

 

Post # 4
Member
343 posts
Helper bee
  • Wedding: October 2013

Mine is 1.5mm or 2mm (I can’t remember, but it’s super thin!). It’s a 1.5ct bezel set moissanite.

Post # 5
Member
3697 posts
Sugar bee
  • Wedding: May 2012

Just scale mine down.  🙂  That’s a little over 1ct on a 2.5mm band.  I LOVE the daintier band with a solitaire.  Obviously I have huge hands so I didn’t want anything super tiny.

Post # 6
Member
1677 posts
Bumble bee
  • Wedding: July 2012

0.43 carats, size 10 hand, no idea how thick the band is, but not very. 🙂

Post # 7
Member
206 posts
Helper bee
  • Wedding: February 2013

1 carat on very thin band. Size 5 finger. G/SI1/Ideal Cut-sorry about my crap photography via the Samsung Galaxy. The stone is much nicer than it looks in this photo. 

 

Post # 8
Member
2903 posts
Sugar bee
  • Wedding: January 2011

My e-ring is a 1.02 diamond with WG 1.8mm band, 3.5 finger size

Post # 10
Member
2788 posts
Sugar bee
  • Wedding: January 2011

Here’s mine.  I don’t remember how thin/thick the band is, but it is pretty thin!  Sorry for the crap cell phone pic.

Post # 11
Member
582 posts
Busy bee
  • Wedding: August 2013

I am not sure the specs of my band :/ but i am a size 5.5 center is 2.75cts if I had to guess I would say 1.5mm but honestly I have no clue i just know it is the thinnest out of all of my friends’ and most engagement rings I have seen

Post # 12
Member
2778 posts
Sugar bee
  • Wedding: July 2013

I did some digging there seem to be a lot of thin bands in the carat range you specified here: http://boards.weddingbee.com/topic/if-you-have-a-ring-under-half-a-carat-show-it-off-here/page/3

I put in the idea board a little while back that we should have a sticky for rings so that all bees could feel represented!  One for all rings, one for .5 and under, one for gemstones and one for moissanite specifically.  Then we could admire them all in one place!!

I hope it gets passed!

Post # 13
Member
95 posts
Worker bee
  • Wedding: July 2012

Mine is Renee from MoissaniteCo. It’s .75 ct. Not sure what band width it is though. Hope you find what you’re looking for. 🙂

Post # 15
Member
346 posts
Helper bee

@bikukii:  your ring is gorgeous. I plan to get one on my right hand cause I LOVE those bezels 🙂

Post # 16
Member
4479 posts
Honey bee
  • Wedding: November 2012

I don’t have a solitaire, but my ring’s 1.7-1.9mm wide.

One thing to be aware of with such thin shanks, especially with palladium or platinum, is the shank CAN bend.  It’s not an easy thing to do, but it can happen, especially with pave bands.

The topic ‘solitaire stone on a very thin band?’ is closed to new replies.

Get our weekly roundup of the best of Weddingbee.
I agree to receive emails from the site. I can withdraw my consent at any time by unsubscribing.

Find Amazing Vendors