(Closed) Stupid Stampin Up Envelopes

posted 6 years ago in Paper
Post # 3
Member
1361 posts
Bumble bee
  • Wedding: September 2012

I’m confused as to why your printer won’t accept the size.  most printers will accept any size.

Post # 5
Member
1361 posts
Bumble bee
  • Wedding: September 2012

Sorry, I’m still confused!  Even if the paper tray won’t get smaller than that, you can still stick the envelope through.  Just line it up with one edge so it goes in straight.

Post # 7
Member
1282 posts
Bumble bee
  • Wedding: November 2012

I had an issue with my printer crinkling the corners of my envelopes even though they were standard size. I found that lightly taping the envelope to a piece of letter sized paper helped. I just had to do some trial and error to get everything centered. it is a bit of a pain to do that with each envelope, but it got the job done. Maybe you can try doing the same with your smaller envelopes.

Post # 8
Member
586 posts
Busy bee
  • Wedding: June 2012

I might be misunderstanding the problem but can you act like it is a letter sized sheet of paper and just keep printing on letter size to line it up the way you want on the envelope and just sent the envelope through?

Post # 9
Member
665 posts
Busy bee
  • Wedding: September 2013

What is the software you are using to print?

Post # 10
Member
665 posts
Busy bee
  • Wedding: September 2013

You can open a Word document and use en envelope template, changer your paper size (custom if the one you want isn’t there) and that will hopefull be communicated from your compter to your printer. Also if you want the hand writted look, print in a very light grey then write over top of it

Post # 11
Member
595 posts
Busy bee
  • Wedding: October 2012

Have you tried changing your printer settings?  Alot of times you can put custom dimensions in.

Post # 13
Member
1282 posts
Bumble bee
  • Wedding: November 2012

@KelannaDC:  It worked for me 🙂 be sure to try setting the printer for thick paper since there will be several layers of paper going through. Also do a test print on a plain piece of paper so you know where the envelope should go to center the address the way you want it, that way you won’t waste an envelope. 

Post # 14
Member
1282 posts
Bumble bee
  • Wedding: November 2012

@KelannaDC:  Oh, forgot to add that you should look on the front and back of the printer to see if there are little ‘doors’ that you can open up for a manual feed option, that way it can feed through straight 

Post # 15
Member
1282 posts
Bumble bee
  • Wedding: November 2012

@KelannaDC:  Oh, forgot to add that depending on the type of printer you are using, you should look on the front and back of the printer to see if there are little ‘doors’ that you can open up for a manual feed option, that way it can feed through straight 

Post # 16
Member
189 posts
Blushing bee
  • Wedding: October 2011

@KelannaDC:  If all else fails why not print on clear labels

The topic ‘Stupid Stampin Up Envelopes’ is closed to new replies.

Find Amazing Vendors