(Closed) Table runner – need help finding!

posted 5 years ago in Decor
  • poll:
  • Post # 2
    Member
    1399 posts
    Bumble bee
    • Wedding: August 2015

    Here’s the fabric — 

    http://www.babybedding.com/gray-geometric-fabric

    It’s 54″ widths. Typically runners are 14″ widths, so you could get three in each span of yardage. If you drop them to 12″ each, you can get four runners with seam allowance. 

    So if you’re working off four panels, it’s $2.50 per yard per runner. Your overall cost will obviously depend on your table lengths and number of tables. 🙂

    Post # 5
    Member
    47439 posts
    Honey Beekeeper
    • Wedding: November 1999

    View original reply
    melanie36:  The minimum length a table runner should hang over the edge of the table on each side is 6″; 12-18″ would be better.

    If you have 60″ tables, that means your runner should be 72-96″ long.

    If you  have 72″ tables, the runner should be 82-108″

    ps you don’ even need to be able to sew. You can use iron-on tape to make a hem on all sides.

    The topic ‘Table runner – need help finding!’ is closed to new replies.

    Find Amazing Vendors