(Closed) Two Wedding bands…Yes Please

posted 6 years ago in Rings
  • poll: What do you think?
    Have them soldered : (4 votes)
    11 %
    Have only one band and e ring soldered : (7 votes)
    20 %
    Dont have them soldered : (24 votes)
    69 %
  • Post # 3
    Member
    7902 posts
    Bumble Beekeeper
    • Wedding: March 2012 - Pelican Grand Beach Resort

    I’m confused about what you mean. Do you have an e ring and 2 different wedding bands that you intend to wear at the same time, all 3 rings at once, or is the second band your wedding band and the first is your e ring?

    Post # 4
    Member
    5118 posts
    Bee Keeper
    • Wedding: November 1999

    I have a thin one to wear with my e-ring and a thicker one with a pattern to wear alone. For the ceremony, I wore my e-ring on my right hand and Mr.ND placed both wedding bands on my left ring finger. The week after the wedding, I dropped the thin one and the e-ring off at the jewelers to get soldered so they wouldn’t rub and wear down. This way I got the best of both worlds, and both bands are my actual wedding bands since he put them both on in the ceremony.

    Post # 5
    Member
    4676 posts
    Honey bee
    • Wedding: August 2012

    I plan on using both at the ceremony and not soldering together (but my e-ring is my FI’s grandmothers, so I want to be able to pass it on when the time comes) I do think it would be nice to be able to get them soldered though, mine are rounded around were they should hit the diamond in my e-ring, but they move around quite a bit.  In my ‘shouldn’t be wearing my wedding bands quite yet’ experience I have had to fix them a lot.  I wish there was an option to have them joined without soldering! 

    Post # 6
    Member
    5118 posts
    Bee Keeper
    • Wedding: November 1999

    @auggiefrog:  I’d check with the jeweler. My ring is an heirloom as well, but they said that if they’re properly soldered, it wouldn’t be much work to take them apart and polish them up when the time comes. They said the work to fix up after taking them apart is less than repairing a rub down of the basket on my ring.

    Post # 8
    Member
    7902 posts
    Bumble Beekeeper
    • Wedding: March 2012 - Pelican Grand Beach Resort

    @Gavinsmamma:  Okay, so you’ve kind of made your own enhancer, then. I’d probably get the soldered so that they don’t spin independently. The only reason I wouldn’t is if you’d like to be abel to wear just one band alone when you are doing things active or dangerous or whatever… running, at water parks, gardening, etc.

    Post # 9
    Member
    5118 posts
    Bee Keeper
    • Wedding: November 1999

    @Gavinsmamma: If you’re in the nursing field, I’d suggest soldering one and leaving the other loose. Your prongs don’t look like they’d always tear a glove, but your bands sure look much smoother/low profile. Having just a single band may be easier for work…oooor, a great excuse to solder both on to the e-ring and then get a plain, smooth work band 😉 

    Post # 10
    Member
    602 posts
    Busy bee
    • Wedding: March 2012

    I just got married last week.  I had only one band at the time of the wedding and thought it looked asymmetrical so I got another one on Thursday.  I’m not planning on having them sodered together so I can only wear one if I wanted or just wear my e ring.  Here is a pic.

     

    Post # 12
    Member
    182 posts
    Blushing bee
    • Wedding: February 2014

    I’m thinkin of getting another one for mine…it would be the same one just worn upside down on top of my e-ring. Any thoughts ladies?….anywho, I think I’m with Hobokenbride2012 on this one…just leave them unsoldered.

    The topic ‘Two Wedding bands…Yes Please’ is closed to new replies.

    Find Amazing Vendors