(Closed) Wear From Not Sodering Rings?

posted 6 years ago in Rings
  • poll: Will this cause extra wear?
    Yes : (8 votes)
    57 %
    No : (5 votes)
    36 %
    Other--please explain : (1 votes)
    7 %
  • Post # 2
    174 posts
    Blushing bee
    • Wedding: May 2016

    I don’t have my rings yet but I plan on doing it. The jeweler told me it will wear down the metal as well as scratch it. 

    Post # 3
    826 posts
    Busy bee
    • Wedding: September 2015

    Yes, especially if they are made of two different types of metals.

    Post # 4
    320 posts
    Helper bee

    You might get a little bit of wear, but I would never want my rings soldered. I like to switch around my stack and often wear just my wedding band. If they are soldered, you won’t have many options. 

    Post # 5
    3791 posts
    Honey bee
    • Wedding: October 2014

    I had my ring soldered, as I had had 2 bands placed around my e-ring, and knew that they would spin over time – or wear. I never thought to have different bands, or to just wear my wedding bands… so this worked for me. Everyone is different though. If I had just gone with the matching band that came with my ring, it may have been different, but since we got an extra one – it was better since I wouldn’t want 2 bands on one side of the e-ring. That’s just me.

    Post # 6
    4812 posts
    Honey bee
    • Wedding: January 2010

    If they are “flat” against each other and fit snug enough, wear will happen but should be minimal. If you have prongs, donuts, stones, irregular shapes, pave, and so on, you can get more wear and damage. My jeweler always recommends soldering, but I personally like the flexibility of changing things up, wearing only one ring at a time, and so on. Many women get a small spacer band so the spacer takes the abuse, not the rings.

    I don’t have pics, but I have seen a few pics of rings on Pricescope and such with wear from rubbing.

    Post # 7
    298 posts
    Helper bee
    • Wedding: April 2000


    View original reply
    View original reply

    I agree with RayKay…if your bands sit flush and there aren’t prongs or pave diamonds rubbing, then the wear should not be bad.  I have worn my 1/3 carat diamond anniversary band for 15 years with various rings.  I have yet to have any wear at all really with that or the  rings worn with it.  I do wear a small 1.5mm spacer band a lot to help with the wear on some of my rings.  I like to mix things up and switch bands around…so soldering was never an option for me.

    Post # 8
    2452 posts
    Buzzing bee
    • Wedding: November 2015 - City, State

    I’ve been wondering this same thing. My e-ring is 14k yellow gold and my wedding band is 14k white gold. They’re contoured and were made to match but I’m not sure if it’ll cause damage over the years because my rings do spin  and don’t always align. I might wait to solder until I get an anniversary band so it’s a once and done type thing. I plan on wearing my set altogether or not at all.

    Post # 9
    2156 posts
    Buzzing bee

    If they are two different kinds of gold, then yes, it will wear. Specifically, the metal of your ering (which is harder) will wear on your wedding ring (which is softer). If they were the same type of gold, you should have few worries. 

    Post # 10
    2979 posts
    Sugar bee
    • Wedding: September 2017

    Yes they will wear. I still prefer them seperate as I like to mix and match. I don’t like the restrictiveness of soldering together.

    The topic ‘Wear From Not Sodering Rings?’ is closed to new replies.

    Find Amazing Vendors